Hyundai HRP-S09WH Service Manual page 20

ECO button
In cool mode, press this button can turn on or turn off the ECO function. When ECO function is on, " ECO " icon is displayed on
remote controller.
Note:
● Air conditioner will operate at auto speed. Set temperature can't be adjusted.
● Under cool mode, sleep function can not work with ECO function together at the same time.
● Change mode will exit the ECO function.
● No turbo function under ECO condition.
SLEEP button
Press this button to turn on or turn off the Sleep function under cool, heat, dry mode. When Sleep function is on, "
displayed on remote controller.
Note:
● This function is off as defaulted after power on.
● It will be cleared after changing mode.
● It is no use under "Fan" mode and "Auto" mode.
TIMER button
This button can set the time for timer on(timer off). After pressing this button, "
" or " " button within 5s to set timer on
Press "
(timer off) time. Each pressing of "
the time will change quickly until reaching your required time. Press "TIMER" button to confi rm it. The icon "
blinking.
Cancel Timer on (off)
In the condition of timer on (off) is started up, press "TIMER" button to cancel it.
Note:
● Time set range 0.5~24hours, time scale is 0.5 hours.
● Timing of the initital set hour is 0.0 hour.
LIGHT button
Press this button can turn on or turn off the light for indoor unit's display. When light function is on, "
remote controller.
HEALTH button
Press this button to turn on or turn off the health function. When health function is on, "
Note: This function is not available for some models.
button
Press this button to turn on or turn off the SMART function. When SMART function is on, "
controller. For more details, please see nextpage for Smart APP User Guide.
Function introduction for combination buttons
Child lock function
Press " " and " " simultaneously to turn on or turn off child lock function. When child lock function is on, "
displayed on remote controller. If you operate the remote controller, the "
the unit.
Force defrost
In the heating mode, press "FAN" and "MODE" buttons together for 3s would start or cancel the Force defrost.
" or " " button, the time will increase or decrease 0.5 hour. Hold "
" icon displayed and "
" icon is displayed on remote controller.
" icon is displayed on remote
" icon will blink three times without sending signal to
Function and Control Function and Control
" icon is
( ) " icon blinking.
" or " " button,
( ) " will stop
" icon is displayed on
" icon is
17