Removal Procedure
Removal Procedure
10. Removal Procedure
10.1 Removal Procedure of Indoor Unit
Warning
Be sure to wait for a minimum of 10 minutes after turning off all power supplies before disassembly.
Sleeve
76
Procedure
Display board
Guide louver
Model:
09K/12K
1. Before disassembly
2. Remove panel and Display Board
A: Open the front panel.
B: Loosen the screws of the display board with
screwdriver.
C: Push the rotor shaft on both sides of the panel
to make it separate from the groove. Remove
the panel.
3. Remove guide louver
Remove axial sleeve of guide louver.
Note