Perform the following steps to set up the Zyxel device:
1.
Use an Ethernet cable to connect your gateway modem to the WAN port.
2.
(Optional) Connect a computer to the LAN port using the yellow Ethernet cable. You can skip this
step if you want to wirelessly connect to the Internet.
Connect the power cable to the Zyxel device and press the POWER button. It can take a couple of
3.
minutes. When the Power, the 2.4G, and 5G LEDs are solid green, the device is ready to be
connected to the wireless network.
Perform the following steps to connect your wireless device to the wireless network:
1.
Open the WiFi network list on your wireless device.
2.
Select the name, that is the SSID of your wireless network that is available on the device label.
3.
Enter the password, that is the Wireless Key that is available on the device label.
4.
Click Connect.
5.1.
Web Configurator Overview
The Web Configurator is an HTML-based management interface used for setting up and managing the
Zyxel device via an Internet browser.
5.2. Software Requirements
The software requirements for using the Web Configurator are the following:
•
Internet Explorer 11.0 or later, or Mozilla Firefox 69.0 or later, or Safari 10.14.6 or later
•
Pop-up blockers by Zyxel are disabled in your browser
•
JavaScript (enabled by default)
•
Java permissions (enabled by default)
7