Star Functions - MAGUIRE Gravimetric Gateway LineMaster Installation Operation & Maintenance

LineMaster

Star Functions

Star Functions are only available in PROGRAM mode:
EXTRUDER MODE - Extrusion and Yield Control, and Rate display.
Press ( ,0,2) to turn on Extrusion or Yield control.
The default display is EXTRUSION CONTROL.
Press
or the following YIELD CONTROL modes:
EXTRUSION - Extruder Control
YLD-X – Extruder Control
YLD-T – Takeoff
YLD-D – Dual
CLEAR DATA PROMPT - Prevent Totals being Cleared
Press ( ,0,5) to inhibit the (00=CLEAR) display at the end of the VIEW
sequence.
Customers using MLAN or G2 software for retrieval of material usage
information may wish to restrict an operators ability to clear the material usage
data at the controller. This option allows you to remove the floor operators
ability to clear this data. Press
ENABLED and CLEAR DATA PROMPT DISABLED.
SELECT DATE FORMAT - Sets System Date and Time
Press ( ,1,1) to set the date format and to enter the correct date and time into
the real-time clock. Correct date and time is helpful if you are retrieving
information using a printer or are collecting data by computer.
The first display will indicate USA or EUROPE date format.
Use the CE key to toggle from one to the other.
USA will cause all dates to be displayed MONTH/DAY/YEAR.
EUROPE will cause all dates to display DAY/MONTH/YEAR.
Press
keypad numbers. The date and time fields will advance as numbers are
entered. After entering the year, the controller will exit to program mode.
The correct date and time have been entered at the factory and should never
have to be reset. Of course you may be in a different time zone.
Restore Factory Default Settings
Press ( ,1,2) to restore the Blender's hard-coded factory default settings.
Pressing ,1,2 restores Factory Default Settings into "User Settings" and "User
Backup Settings" (retains certain important information). Display will show:
to toggle this flag EXTRUSION CONTROL,
to enter the current date and time. Enter the date and time using the
to toggle between CLEAR DATA PROMPT
Maguire Products, Inc.
69