Avaya S8100 Series Manual page 1242

Accessing the media server
Computer specifications
The computer that you use to access the media server must have the following minimum
specifications:
Windows 2000 or Windows XP operating system
●
32-MB of RAM
●
40-MB of available disk space
●
An RS-232 port connector
●
A Network interface card (NIC) with a 10/100BaseT Ethernet interface
●
A 10/100 BaseT Ethernet, CAT5 or better, cross-connect cable with an RJ45 connector on
●
each end (MDI to MDI-X)
CD-ROM drive
●
Network configuration
You also must configure your network connection. For more information, see
configuration on page 1249.
The network connection for the computer has the following TCP/IP properties:
IP address: 192.11.13.5
●
Subnet mask: 255.255.255.252
●
After you connect the computer to the network, you can administer the media server through
these interfaces:
The Maintenance Web Interface for server-specific administration.
●
A command line interface in a Telnet or terminal emulation application for Linux and SAT
●
commands, respectively. For duplicated media servers, you can use the SAT commands
on the active media server only.
For more information, see
1242 Upgrading, Migrating, and Converting Media Servers and Gateways
Accessing the Maintenance Web Interface
Network
on page 1245.