Avaya S8100 Series Manual page 1103

Post-conversion tasks
You must complete the following task after you complete the conversion tasks.
Connecting to the active media server
If you are on site, connect to the services port on the back of the active media server.
If you are off site, log on to the active media server with the actual IP address of the media
server.
Enabling scheduled maintenance with SAT
To enable scheduled maintenance.
1. Type change system-parameters maintenance and press Enter.
2. Ensure that the administration for the Start Time and Stop Time fields is the same as
before the upgrade.
Checking for translation corruption with SAT (main server only)
To check for translation corruption:
1. Type newterm and press Enter.
2. If you see the following message:
Warning: Translation corruption detected
then follow the normal escalation procedure for translation corruption before you continue
the upgrade.
Post-conversion tasks
Issue 2.1 June 2006 1103