Using The Cable-Access Bar In The Bottom Of The Rack Cabinet - IBM Power Systems 7953-94X Installing

Front to
rear cable
channels
Cable
channels
caps
Front to
rear cable
channels
Cable
channels
caps
Figure 24. Removing the caps from the front-to-rear cable channels

Using the cable-access bar in the bottom of the rack cabinet

The cable-access bar on the bottom rear of the rack cabinet keeps the external cables in place.
To route external cables through the opening in the bottom rear of the rack, complete the following steps:
1. Remove the four screws that attach the cable-access bar to the rack cabinet, as shown in the following
illustration.
Installing the 7953-94X and 7965-94Y rack and features
27