IBM Power Systems 7953-94X Installing page 19

Figure 4. Removing and installing the outriggers
To remove the outriggers, use the 6 mm hex wrench that comes in the hardware kit to remove the four
bolts that attach each outrigger to the rack cabinet. Keep the outriggers and bolts for future use if you
need to move the rack.
Note:
1. Before you attach an expansion rack to a standard rack or another expansion rack, you must remove
the outriggers from the racks so that the racks fit together correctly.
2. You can install or remove the outriggers on a rack cabinet with or without side covers.
5
Installing the 7953-94X and 7965-94Y rack and features