Aspect BIS VIEW Service Information Manual page 86

SECTION 9
_______________________________________________________________________
Guidance and Manufacturer's Declaration - Electromagnetic
Immunity
The BIS VIEW Monitoring System is intended for use in the electromagnetic environment
specified below. The customer or user of the BIS VIEW system should assure that it is used
in such an environment.
Immunity IEC 60601
Test Test Level
Conducted RF 3 Vrms
IEC 61000-4-6 150 kHz to 80
MHz
Radiated RF
IEC 61000-4-3 3 V/m
80 MHz to 2.5
GHz
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
SPECIFICATIONS AND WARRANTY
Compliance Electromagnetic
Level Environment - Guidance
Portable and mobile RF
communications equipment should
be used no closer to any part of the
BIS VIEW system, including cables,
than the recommended separation
distance calculated from the equation
applicable to the frequency of the
transmitter.
Recommended separation
distance
3 V
d = 1.2
d = 1.2
3 V/m
d = 2.3
where P is the maximum output
power rating of the transmitter in
watts according to the transmitter
manufacturer and d is the
recommended separation distance in
meters (m).
Field strengths from fixed RF
transmitters, as determined by
electromagnetic site survey
be less than the compliance level in
each frequency range.
may occur in the vicinity of
equipment marked with the
following
symbol:
9-8
, 80 MHz to 800 MHz
, 800 MHz to 2.5 GHz
a
, should
b
Interference