Aspect BIS VIEW Service Information Manual page 15

SECTION 1
________________________________________________________________________
The BIS VIEW system complies with the electromagnetic compatibility
requirements of IEC 60601-1-2. Operation of this device may affect or be affected by
other equipment in the vicinity due to electromagnetic interference (EMI). If this
occurs:
• Increase separation between devices
• Re-orient device cabling
• Plug devices into separate outlet circuit branches
Refer to Section 9.2 "Electromagnetic Compatibility Specifications."
When connecting or disconnecting BISx, take care not to touch the exposed contacts
of either connector. Damage due to electrostatic discharge may result.
All work involving opening the instrument case must be performed in a static-safe
environment to prevent damage to electronic components and assemblies. This
environment includes the operator, work area and tools, and any other test or storage
items that might touch the monitor or BISx assemblies.
Exposed metal parts are double insulated from live parts of the monitor and are not
wired for safety current. A ground continuity test is not recommended.
Important:
The BIS VIEW systems comply with the European Medical Device Directive (MDD)
and applicable regulatory requirements of the country distributed to and carry the
CE Marking. Declarations of Conformity provided upon request where
XXXX
appropriate.
SAFETY PRECAUTIONS
1-5