Bartscher KV1 Classic Manual page 17

Installation and operation
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Do not use the appliance with an external timer or remote control.
Water connection
For the water supply, the appliance comes with a factory-installed water tank.
Should such a need arise, the appliance can be connected to mains piping.
In order to utilise the connection, consider the following information:
– max. input water pressure is 3 bar
– min. input water pressure is 1 bar
Important Indication:
Starting with water hardness of 5° dH (German degrees), a water softening
device should be installed. We recommend the following products from
our range:
– Water filtering system for coffee makers, art. No. 109881
– Water softening device, WEH1350, art. No. 109878
190052
EN
15 / 44