Bartscher KV1 Classic Manual page 20

Appliance start-up
1. Plug the appliance into a suitable single socket.
2. Set the mains switch at the back of the appliance to 'I'.
3. Press the ON/OFF switch at the left side of the control panel to activate the
appliance.
With first use, the coffee machine performs an auto-test and cleaning. This helps
the appliance to achieve better working conditions. This process cannot be omitted.
WARNING! Risk of burns!
During the cleaning process, hot water flows from the coffee outlet onto
the drip tray.
Avoid contact with the outflowing hot water.
4. Prior the next operation, make sure the appliance is in the 'Ready' mode.
Program setting
1. Make sure the 'Ready' message is shown on the display, and then press and
hold the 'MENU / OK' button for 3 seconds.
EN
18 / 44
Installation and operation
2. Then, select the program setting menu.
3. Use the '∧' and '∨' setting buttons, and
keep them pressing to select from
amongst various setting options:
– maintenance settings;
– beverage settings;
– appliance settings, etc.
4. To save a setting, press 'MENU / OK'
button.
5. Then, press the 'Back' button, to leave
the menu.
190052