Installation And Operation; Installation - Bartscher KV1 Classic Manual

5

Installation and operation

5.1

Installation

Unpacking / Positioning
•
Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•
If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•
Be careful not to damage the rating plate and warning labels fixed on the
appliance.
EN
•
Never place the appliance in humid or wet environment.
•
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•
The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
Mind the sufficient clearance from the walls and other flammable objects or
objects that are prone to discolouration. This clearance must be at least 5 cm
from the back and both sides, and 15 cm from the top. Note the fire safety
provisions at the place of installation.
•
When in operation, the appliance may not be installed in a cabinet.
14 / 44
CAUTION!
Installation and operation
190052