Product Features / Warnings - KOCOM KHV-446S User Manual

Product Features
�
Main Body
1. Bus type wiring that is adopted for connection between monitor and guardroom makes
product installation easier.
2. Since the product is adjusted to AC 220V or AC 110V, no additional DC adapter is needed.
�
Instructions for Right Use
● Do not place the product near humidifier or heater. High temperature and humidity may
cause unexpected mechanical troubles of the product.
● Do neither drop main body and front door camera nor great impact on them.
● Do not close main body to the equipment emitting strong magnetic force
(TV, speaker, etc.)
(It may cause trembling or distortion of screen image which result in breakdown.)
● In cleaning, do neither contact the product with wet hands nor use volatile substances such
as benzene or thinner.
● To maintain high-definition of screen image, wash main body and window part of camera
from time to time.
● As this equipment is an electronic precision instrument and high-voltage occurs in its
interior, do not disassemble the equipment arbitrarily.
All the above-mentioned cases constitute the causes of product' s breakdown.
Pay attention to these instructions when handling the product.
�
Instructions for Installation
● Appropriate circuit breaker should be installed in interior wiring part of building.
● When disconnecting power cable form connector, fix the cable not to contact with second-
order side or case.
● The color of GND wire should be green or yellow and be fixed to chassis
(GND-marked position) using washer with proper elasticity together.
8
_www.kocom.com
Components
�
Main Body Components
� Concealed
Box
� Power Terminal
� 8 Kinds of
� Power Supply Unit Connectors
Product Configurations
※ Antenna is only included in
KHV-446ST and 456ST.
※ Fire and Gas leakage prevention function
are excluded from KHV-446T and 456T.
※ KHV-446ST/456ST as standard.
Functions vary according to
specifications of each product.
�
Front Door Camera Components
� Single-hole Switch Box
� Components for the installation of
concealed type box excluded from
package. If necessary, call to
selling store.
� Vis for fixing camera to the support
of main body
� Vis for fing camera to the wall peg
※ Some components are excluded from
� fing camera peg
package or sold separately.
Security Home Auto System_
9