Download Print this page
KOCOM KDP-603 User's Manual For Operation And Installation

KOCOM KDP-603 User's Manual For Operation And Installation

Interphone for apartment unit

Advertisement

Quick Links

Warranty
To receive after-Sale service, have the following ready
when you contact our branches
1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at
which you can be contacted.
Warranty Card
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS
KOCOM Warranties the original purchaser of this product
as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM
will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
This manual is based on the date as shown in the right and specifications
are subject to change without notice for quality improvement.
KDP-603 O0808
Interphone
for Apartment Unit
KDP-603/603A User' s Manual for Operation and Installation
■ Interactive call and communication between house and guardroom.
■ Communication with lobby phone and door open function.
Thank you very much
for purchasing KOCOM
video doorphone.
please read this manual
thoroughly to ensure
correct usage, before
operating.

Advertisement

loading
Need help?

Need help?

Do you have a question about the KDP-603 and is the answer not in the manual?

Questions and answers

Summary of Contents for KOCOM KDP-603

  • Page 1 1) This product is produced under strict quality control and inspection procedures. 2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge.
  • Page 2: Cautions For Safety

    ㆍDo not disassemble this unit at will as this device is composed by precision parts. ㆍInstall the unit by following the set-up instructions of Kocom. ㆍDo not touch or insert any foreign substances, for example, sticker, magnetic, opener and the like Caution ㆍMake U-type at the end of wires as the rain can effect on the system by following the wires during the rainy season.
  • Page 3 Inner Lines (Yellow) Internal Call button Product Specification Door Open Button: Pressing the button after communication with lobby, opener installed lobby door is opened. KDP-603 KDP-603A Power DC 14V~18V AC220V~, 60Hz Consuming Max 1W (standby mode) / Max 1.5W (standby mode) /...
  • Page 4 Call to guardroom for communication Wiring Specification ・If picking up handset and pressing guard/lobby button, ・ 5-line polar wiring between wirings in main line of apartment unit guardroom is called out (call maintains for 30 seconds). ・ 6-line polar wiring between KVM-520,KIV-102,KIV-212,KCV-802R (monitor) and interphone (When other house is not on the line, LED is turned on.) ・...
  • Page 5 Instructions for Operation Instructions for Operation ■ Password Change Model: (KDP-100 / KLP-100 / KLP-P100 / KLP-C100), Functional Specifications ▷ (Password change function is only available during the call with house.) Call to house Pressing “ # # 0 0 #” during the call with house, “ - - - - ”...
  • Page 6 DIP Switch Setting at House Interphone and Video Phone ■OLD MODE : It is compatible with the existing units. ID is available with 1~63, 1000~1963, 2000~2963, 3000~3963. There should be no mixed protocol in a system. Mixed protocol in a system can make [Lobby Phone's Direct-Button Call Function] the malfunction of system.
  • Page 7 ex4) ex8) In this case, DIP SWITCH 1, 9, 11, 12 is put to ON, the result is 1+400+1000=1401, In this case, DIP SWITCH 2, 7, 11, 12 is the house No.1401 put to ON, the result is 2+100+1000+2000 =3102, the house No.3102 ex5) ex9) In this case, DIP SWITCH 1, 2, 7 is...
  • Page 8 DIP Switch Setting at House Interphone and Video Phone 2. Precautions for DIP Switch Setting (House No. Setting) 1) After setting DIP switches, device power should be reset. ■ NEW MODE : It is available to set from No. 1~1599. (In power switch ON state, DIP switches cannot be set.) 1) DIP SW 1~4, it is available by 15, the sum of 1248.
  • Page 9 ex3) To set the house No.999 In this case, DIP SWITCH 1, 4, 5, 8, 9, 12 is put to ON, the result is 1+8+10+80+100+800=999, the house No.999 ex4) To set the house No.1203 In this case, DIP SWITCH 1, 2, 11, 12 is put to ON, the result is 1+2+400+800=1203, the house No.1203...
  • Page 10 Memo Memo...

This manual is also suitable for:

Kdp-603a