Read before requesting the repairing works...
Do not fail to check the following items before requesting the repairing works. If no troubles are found out after check, contact
KOCOM' s local service center.
Alarming Situation
Check Points
�
�
Power connection
Please check whether power
failure
switch on the front-bottom side of
main body is turned on.
�
�
Failures in
Is outside telephone line
communication with
connected to product installation
Telephone line,
place?Is common Gate or
common
guard installed?
Gate, and
guard
�
Isn' t the door open?
�
Failures in security
(security sensor works)
�
setting
Isn' t the wiring for security
�
Failure in releasing the
sensor disconnected?
security mode
�
Did you check the pertinent
security sensor?
�
Isn' t the wiring for pertinent
�
Failures in returning to
security sensor disconnected or
alarm mode
short-circuited?
�
Isn' t the door where sensor is
attached opened?
�
No call signal heard
from Gate or
guard calls
Actions
�
Turn on the power switch.
�
Try to other handset.
If no troubles are found, request A/S.
�
Contact guard to inquire whether
communication with common Gate or
guard is available.
�
Turn off and on the switch at the front-bottom side
of main body.
�
Close the door.
�
Restore the damaged wiring.
�
For normal operation of returning to alarm mode,
alarming factors should be checked and removed.
�
Restore the disconnected or short-circuited wiring
�
Close the door.
�
Turn off and on the switch at the front-bottom side
of main body.