KOCOM KIP-603 User Manual

KOCOM KIP-603 User Manual

Interphone for apartment unit

Advertisement

Warranty
To receive after-Sale service, have the following ready
when you contact our branches
1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at
which you can be contacted.

Warranty Card

PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS
KOCOM Warranties the original purchaser of this product
as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM
will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
This manual is based on the date as shown in the right and specifications
are subject to change without notice for quality improvement.
KIP-603 04.04
Interphone
for Apartment Unit
KIP-603 User' s Manual for Operation and Installation
Connection up to 2 units of monitors and inter phones, respectively
Lobby chime switch function
Lobby door open/close after communication with lobby phone
Inner line (video phone and interphone) call and communication
Call to and communication with guardroom (KIP-603)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KIP-603 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KOCOM KIP-603

  • Page 1: Warranty Card

    1) This product is produced under strict quality control and inspection procedures. 2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge.
  • Page 2: Installation/External Wiring Diagram

    External Wiring Diagram Precautions for Operation As this device consists of electronic precision components, do not attempt to disassemble. When cleaning, do not use wet hand, volatile benzene or paint thinner. Do not drop this device Use soft cloths dipping in neutral and avoid strong impact.
  • Page 3: Calls

    Call to guardroom for communication Wiring Specification �If picking up handset and pressing guard/lobby button, � 5-line polar wiring between wirings in main line of apartment unit guardroom is called out (call maintains for 30 seconds). � 6-line polar wiring between KVM-520 (monitor) and interphone (When other house is not on the line, LED is turned on.) �...
  • Page 4: Instructions For Operation

    Instructions for Operation (KLP-104/108/112) ,(KLP-P104,P018,P112),(KDP-104,108,112) Model: ▷ Call to house � Instructions for Operation (Model: KLP-100) Functional Specifications 1. Press the house number on the lobby phone. ▷ Call to house (If pressing house number once more for call sound outputs, call is cancelled.) When a visitor calls to house using lobby phone, press house number.
  • Page 5: Dip Switch Setting At House Interphone/Video Phone

    DIP Switch Setting at House Interphone and Video Phone e.g. 3) e.g. 1) 1,000-digit 100-digit 1,10 -digit e.g. 2) Numbers by the figure indicate the number set when all switches move toward ON direction. 1. Above figure, turning all DIP switches from No.1 to No. 12 toward ON direction, numbers set by DIP switches are summed up.
  • Page 6 2. For basement floors, DIP switch No. 11 and 12 are generally set toward ON direction. 4. Precautions for DIP Switch Setting (House No. Setting) In this case, the value of DIP switch setting is 3,000 (1,000 + 2,000). However, program uses “8” with 1) After setting DIP switches, device power should be reset.

Table of Contents

Save PDF