Interlocked Communication With 900Mhz Wireless Telephone - KOCOM KHV-446S User Manual

�
In the event that an emergency occurs when alarming sound is stopped...
stop
�While alarming sound is heard, the concerned LED
flickers.
�Pressing the "stop alarm" button, alarming sound is
turned off.
� Returning to Alarming Mode
(Concerned alarming sound)
�When alarming sound is being heard
or stopped
28
_www.kocom.com
(Concerned alarming sound)
� In the event that other emergency occurs while alarming sound is
stopped, "stop alarm" mode is released and both the previous and new
alarming sounds occur in order.
�Pressing the "reset" button, alarming sound is turned off,
with alarming state returning to normal state and alarming LED
being turned off (Reset).
�Only if a situation that caused alarming state is removed, reset to
alarm mode works.

Interlocked Communication with 900MHz Wireless Telephone

� Interlocked Communication Method
� In case of calls from Gate camera or guard, or incoming telephone call, user can communicate with other party using
main body as well as 900MHz wireless telephone.
�For outgoing general telephone call, call with Gate and guard, and direct dialing call, user can use wireless telephone
for communication.
�
A Call from Gate (or Guard) While Communication Using Wireless Telephone
�After hanging up the wireless telephone, press the "talk" button to communicate with Gate
(guard or common gate).
� Setting the Wireless Telephone
Reset
Wireless Handset Setting Button�
�Press the Wireless Setting button on the main body of Home Auto. Then, press the "function," "redial," and "1" buttons on
wireless handset in order. After 2 ~ 3 seconds, user can hear beep sound from the handset, which indicating that setting is
completed.
(KHV-446ST/KHV-456ST Products)
29
Security Home Auto System_