JLG 600AJ Operation And Safety Manual page 49

6. Drive Orientation Override
When the boom is swung over the rear tires or
further in either direction, the Drive Orienta-
tion indicator will illuminate when the drive
function is selected. Push and release the switch, and within
3 seconds move the Drive/Steer control to activate drive or
steer. Before driving, locate the black/white orientation
arrows on both the chassis and the platform controls. Move
the drive controls in a direction matching the directional
arrows for the intended direction of travel.
NOTE:
Lift, Swing, and Drive control levers are spring-loaded and will
automatically return to neutral (off) position when released.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
31215030
SECTION 3 - MACHINE CONTROLS AND INDICATORS
NOTE: To operate the Drive joystick, pull up on the lock-
ing ring below the handle.
NOTE:
The Drive joystick is spring loaded and will automatically return
to neutral (off) position when released.
7. Drive/Steer
Push forward to drive forward,
pull back to drive in reverse.
Steering is accomplished via a
thumb-activated rocker switch on
the end of the steer handle.
8. Main Boom Telescope
Provides extension and retraction of the main
boom.
9.
Lights (If Equipped)
This switch operates the accessory lights pack-
age if the machine is so equipped.
3-13