Section - 7 - General Specifications & Operator Mainte; Introduction; Operating Specifications; Operating Specifications - JLG 600AJ Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .......................................... 31215031
Illustrated Parts Manual ............................................................. 31215032
31215030
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS

Table 7-1. Operating Specifications
Maximum Work Load (Capacity) - ANSI
Unrestricted:
Maximum Work Load (Capacity) - CE &
Australia
Unrestricted:
Maximum Operating Slope
Maximum Travel Grade, Stowed Position
(Gradeability)
2WD
4WD
Maximum Travel Grade, Stowed Position
(Side Slope)
Turning Radius - (outside)
2WS
4WS
500 lb (227 kg)
500 lb (230 kg)
ANSI/CE/AUS - 4°
China - 5°
7ft Chassis - ANSI/AUS - 3°
7ft Chassis - China - 5°
30%
45%
ANSI/CE/AUS - 4°
China - 5°
7ft Chassis - ANSI/AUS - 3°
7ft Chassis - China - 5°
17 ft. 8 in. (5.38 m)
11 ft. 8 in. (3.56 m)
7-1