JLG 600AJ Operation And Safety Manual page 40

SECTION 3 - MACHINE CONTROLS AND INDICATORS
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
NOTE: When machine is shut down the Platform/
Ground Select switch and Emergency Stop must
be positioned to OFF.
1. Platform Rotate
Provides rotation of the platform.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANT TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
3-4
2. Platform Leveling Override
A three position switch allows the
operator to adjust the automatic self
leveling system. This switch is used to
adjust platform level in situations
such as ascending/descending a
grade.
3.
Jib
Provides raising and lowering of the
jib.
NOTE: When Power/Emergency Stop switch is in the "On" position and
engine is not running, an alarm will sound, indicating Ignition is
"On".
4. Power/Emergency Stop Switch
A two-position red mushroom shaped switch
supplies power to Platform/Ground Select
switch when pulled out (on). When pushed in
(off ), power is shut off to the Platform/Ground Select switch.
31215030