Use; Switching On And Off; Setting The Speed/Tightening Torque; Changing The Direction Of Rotation - Parkside PDSSA 12 A1 Translation Of The Original Instructions

With hammer function
In second gear (speed selector switch
position: 2)
you can reach a speed of approx. 3000 rpm for
carrying out drilling work.

Use

Switching on and off
Switching on:
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in.
The LED working light
ON/OFF switch
This provides illumination of the work area in
poor lighting conditions.
Switching off:
♦ Release the ON/OFF switch
appliance.

Setting the speed/tightening torque

♦ Press the ON/OFF switch
speed/tightening torque. Increasing the pres-
sure increases the speed/tightening torque.
■ The tightening torque depends on the selected
speed and impact duration.
ATTENTION!
♦ The tightening torque actually attained must
always be checked with a torque wrench!
NOTE
► The integrated motor brake ensures rapid
stoppage.

Changing the direction of rotation

♦ Change the direction of rotation by pressing
the rotation direction switch
or right.
│ GB │ MT
■ 44
lights up when the
is depressed lightly or fully.
to switch off the
lightly for a low
towards the left

Activate lock

♦ Push the rotation direction switch
in
middle position. The ON/OFF switch
blocked.

Inserting bits

♦ Insert a suitable bit or adapter (not supplied)
into the tool holder
♦ Pull the locking sleeve
the bit or the adapter to click into place.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as batteries,
switches) can be ordered via our service
hotline.
into the
is
.
backwards and allow
PDSSA 12 A1