When To Refill The Rinse Aid Dispenser; Adjusting The Rinse Aid Dispenser - Kogan 9 Series User Manual

Fully integrated dishwasher

Hide thumbs Also See for 9 Series:

Table of Contents

When to refill the rinse aid dispenser

The remaining amount of rinse-aid can be estimated by the colour of the optical level

indicator "D" located next to the cap. When the rinse-aid container is full, the whole

indicator will be dark. As the rinse aid diminishes, the size of the dark dot decreases. Avoid

letting the rinse aid get below 1/4 full.

●

Full

¾ full

½ full

¼ full – should refill to eliminate spotting

Empty

The rinse aid dispenser has six settings. Always start with the dispenser set on "4". If spots

and poor drying are problems, increase the amount of rinse aid dispensed by removing the

dispenser lid and rotating the dial to "5". If the dishes still are not drying properly or are

spotted, adjust the dial to the next higher number until the dishes are spot-free. The dose is

factory set in position 5.

Note:

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware

or knife blades.

D (rinse-aid indicator)

Adjust lever (rinse aid)

Table of Contents

Show Quick Links

Table of Contents