Removing The Filter Assembly - Kogan 9 Series User Manual

Removing the filter assembly

Step 1:
Rotate the coarse filter counter-clockwise and then lift it up and out of the flat filter.
Step 2:
Lift the flat filter up and out of the base.
To reinsert the filter, simply follow the above steps in reverse order.
Inspect the filters for obstructions every time the dishwasher has been used. Remove any
food remnants and clean the filters under running water.
The entire filter assembly should be cleaned once a week. Use a brush to clean the coarse
filter and the micro-filter, then reassemble the filter parts as shown in the figures above and
reinsert the entire assembly in the dishwasher, position it in its seat and press downward.
The dishwasher must never be used without the filters. Improper replacement of the filter
may reduce the performance level of the appliance and damaged dishes and utensils.