Adding Dishes During A Cycle; Switch Off The Dishwasher; Unloading The Dishwasher - Kogan 9 Series User Manual

Fully integrated dishwasher
Hide thumbs Also See for 9 Series:
Table of Contents

Advertisement

Adding dishes during a cycle

A forgotten dish can be added any time before the detergent cup opens.
1.
Open the door slightly to stop the wash cycle.
2.
After the spray arms stop moving, the door can be opened completely.
3.
Add forgotten dishes.
4.
Close the door; the dishwasher will recommence operation after ten seconds.
WARNING:
as the hot water presents a risk of burns or scalding.

Switch off the dishwasher

The digital display will show "--" and the buzzer will ring 6 times when the selected program
has ended.
1.
Switch off the dishwasher by pressing the "Power" button.
2.
Turn off the water tap.
Open the door carefully. Hot steam may escape when the door is opened.
Hot dishes are sensitive to knocks. The dishes should, therefore, be allowed to cool
down around 15 minutes before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing
the dishes. In this way, they will be cooler and drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher will be wet inside after use.
Empty the lower basket first before the upper basket. This will avoid water dripping
from the upper basket onto the dishes in the lower one.
It is dangerous to open the door when washing,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents