Connecting the water inlet hose
Connect the cold-water supply hose to a threaded ¾" connector and make sure that it is
fastened tightly in place. If the water pipes are new or have not been used for an extended
period, let the water run to make sure that the water is clear and free of impurities. If this
precaution is not taken, there is a risk that the water inlet can get blocked and the appliance
could be damaged.
Connecting the water outlet hose
•
Fit the drainage hose of the machine to the drainage pipe without bending.
•
If the length of the hose is not sufficient, contact Kogan.com for an extension made
from the same material as the original.
•
The length of the hose should not exceed 4 meters, even with an extension. If the
drainage hose is longer than 4 meters, the dishes will not be cleaned properly.
•
Secure the hose firmly to the drainage pipe to avoid it coming loose during the
washing process.
Min⌀40mm