Filling The Rinse Aid Dispenser - Kogan KAFREEWASHA Instruction Manual / Installation Manual

Filling The Rinse Aid Dispenser

1. To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2. Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to overflow.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed
(right) arrow.
NOTE: Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming
during the next wash.
ADJUSTING THE RINSE AID RESERVOIR
The rinse aid reservoir has six settings. Both the recommended setting and the factory setting is
"4". If the dishes are not drying properly or are spotted, adjust the dial to the next higher number
until your dishes are spot-free. Reduce it if there are sticky whitish stains on your dishes or a bluish
film on glassware or knife blades.
14