Error Codes; Before Requesting Service; Troubleshooting - Kogan 9 Series User Manual

TROUBLESHOOTING

Error codes

Codes Meanings
E1 Door open
E2 Water inlet
E3 Water drainage
E4 Temperature sensor
E5 Overflow/leakage
E6 Water leakage
E7 Heating element
WARNING:
If overflow occurs, turn off the main water supply before calling
for service. If there is water in the base pan because of an over fill or small leak,
the water should be removed before restarting the dishwasher.

Before requesting service

Reviewing the charts on the following pages may allow the user to resolve issues before
needing to contact a service professional:
Problem
Fuse has blown or
the circuit breaker
tripped
Dishwasher The power supply is
doesn't run
not turned on
Water pressure is low Check that the water supply is connected
Drain pump
Overflow
doesn't stop
The door is opened when the dishwasher is
operating
Water inlet malfunction
Water drainage malfunction
Temperature sensor malfunction
Overflow occurs/Water leakage occurs
Water leakage occurs
Abnormal heating
Possible Causes
Possible Causes
What to Do
Replace the fuse or reset the circuit breaker.
Remove any other appliances sharing the same
circuit with the dishwasher.
Make sure the dishwasher is turned on and the
door is closed securely. Make sure the power
cord is properly plugged into the wall socket.
properly and the water is turned on.
The system is designed to detect an overflow.
When it does, it shuts off the circulation pump
and turns on the drain pump.