Draining Excess Water From Hoses; Water Outlet; Syphon Connection; Final Checks - Kogan 9 Series User Manual

Draining excess water from hoses

•
If the sink is 1000mm or higher from the floor, the excess water in the hoses cannot
be drained directly into the sink. It will be necessary to drain excess water from
hoses into a bowl or a suitable container that is held outside and lower than the
sink.

Water outlet

•
Connect the water drain hose. The drain hose must be correctly fitted to avoid
water leaks. Ensure that the water inlet hose is not kinked or squashed.

Syphon connection

•
The waste connection must be at a height of between 50cm (minimum) and
100cm (maximum) from the bottom of the dish. The water drain hose should be
affixed with a hose clip.

Final checks

The following should be checked before starting the dishwasher:
•
Whether the dishwasher is level and fixed
•
Whether the inlet valve is opened
•
Whether there is leakage at the connections of the conducts
•
Whether the wires are tightly connected
•
Whether the power is switched on
•
Whether the inlet and drain hoses are knotted
•
Whether all packing and printed materials have been removed