Exiting From Examination - Olympus OEP-5 Instructions Manual

NOTES
• If "NO" is selected in step 2, refer to "Setting
"STORE IMAGE"" in "5.7 Setup of the
"FUNCTION SETUP" Menu" in
"INSTRUCTIONS (ADVANCED)" to restore
and print the image manually.
• The message in step 2 will only appear when
"OEP-4 MODE" is selected from "Setting
"STORE MODE"" in "5.7 Setup of the
"FUNCTION SETUP" Menu" in
"INSTRUCTIONS (ADVANCED)."
3
The message "READING IMAGES" is displayed
on the monitor and the LCD panel. And then the
display returns to the normal display.
4
When image readout completes, message
"RESTORE FINISHED" is displayed on the
monitor and the LCD panel.
5
Select the memory page where images that you
want to print are stored.
6
Press the PRINT button to start printing.
NOTE
When you control the printer from the EVIS EXERA II
video system center (CV-180), EVIS EXERA video
system center (CV-160) or VISERA Pro video system
center (OTV-S7Pro), change the memory page or print
images using the keyboard of the connected equipment.
For details, refer to the instruction manuals of the
connected equipment.
In any case other than the above, see "Selecting the
Memory Page" and "Printing" in "4.2 Control From the
Front Panel" in "INSTRUCTIONS (ADVANCED)."
4.4 Exiting from
Examination
CAUTION
When this instrument is controlled from connected
equipment, the captured images will not be printed
automatically until their number reaches the set number
of multi-picture images. Confirm that there are no
unprinted images in the memory pages before turning
this instrument OFF. Once this instrument is turned
OFF, all images captured in the memory pages are
cleared and cannot be printed.
1
Display the memory image on the monitor, and
confirm that there are no images left unprinted in
the memory page (see "3.6 Inspection of the
Monitor Display" on page 23).
If there are any, print them (see "3.7 Check the
Printed Picture" on page 24).
2
After printing is completed, turn the color video
printer (OEP-5) OFF.

4.4 Exiting from Examination

4
29