Putting into Service
7
Putting into Service
Behaviour after switch-on
There may be a delay of several seconds between switch-on and the unit being ready for
operation.
7.1
Activating the setup
Press the SETUP button within 2 seconds to access the system settings.
Fig.: Activating setup
7.2
Control Panel
All system settings can be made from the Control Panel of Windows Embedded Compact
7.
Special features and device-specific settings are described in the following!
7.2.1
Date/time
Setting the date, time, time zone and winter/summer time
Operating Manual PMI v507, PMI v512
1003981-EN-01
23