Table of Contents
Advertisement
Function description
4
Function description
4.1
Features
The operator terminal has a memory, on which the software PASvisu Server, PASvisu
Viewer PMI and PSS 4000 Firmware (OPC Server) is pre-installed. With the help of this
software, processes can be shown on the display and directly influenced via the touch-
screen. An Ethernet interface is available for the transfer of data, e.g. diagnostic data, and
for communication with other subscribers.
The device is fitted with a real-time clock that is battery-buffered, so allowing it to run for 90
days without an external power supply. The battery is automatically charged during normal
operation by the power supply for the device.
4.2
Side view
Legend
[1] Audio interface LINE OUT
[2] SD/SDHC card
[3] Ethernet interface (100 BaseTX)
[4] Supply voltage
[5] Serial interface COM1 (RS232)
[6] USB Slave
[7] USB Host 1
Operating Manual PMI v507, PMI v512
1003981-EN-01
[1]
[2]
[5]
[4]
[6]
[3]
[7]
[8] [9]
13
Advertisement
Table of Contents
