Safety; Intended Use - Pilz PMI v507 Operating Manual

Safety

3 Safety
3.1

Intended use

This unit is used to operate and monitor technical processes.
The following software is pre-installed for this purpose:
} PASvisu Server
}
PASvisu Viewer PMI
} PSS 4000 Firmware (OPC Server)
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
} Use of the product outside the technical details (see
Operating Manual PMI v507, PMI v512
1003981-EN-01
CAUTION!
The unit is not designed for use in applications with stringent safety require-
ments (e.g. E-STOP).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Technical details [ 27]).
9