Page 2
Preface This document is a translation of the original document. All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for internal purposes. Suggestions and comments for improving this documentation will be gratefully received.
Installation site and unit surroundings Dimensions Installing the unit Installation Section 6 Wiring General wiring guidelines 6.1.1 Shielding 6.1.2 Measures to protect against interference voltages Supply voltage Connection example Interfaces 6.4.1 RS232 interface (COM1) 6.4.2 CANopen interface Operating Manual PMI 6 1003280-EN-01...
Page 4
Various basic settings Section 8 Care and Maintenance Cleaning the touchscreen Section 9 Attachment Supported Windows components Windows CE Shell commands Windows CE Shell commands - Pilz expansions Section 10 Technical details Section 11 Order reference 11.1 Product Operating Manual PMI 6...
CAUTION! This refers to a hazard that can lead to a less serious or minor injury plus material damage, and also provides information on preventive measures that can be taken. Operating Manual PMI 6 1003280-EN-01...
Page 6
It also highlights areas within the text that are of particular import- ance. INFORMATION This gives advice on applications and provides information on special fea- tures. Operating Manual PMI 6 1003280-EN-01...
Front view Legend [1] Touchscreen (see Technical details [ 40]) Scope of supply Operator terminal Retaining clamps Connector plug for power supply Projection stand RJ45 cable for fieldbus junction box SD card as application memory Operating Manual PMI 6 1003280-EN-01...
This device is used to operate and monitor technical processes. The PMI offers the possibility of installing software from third-party suppliers. Pilz GmbH & Co. KG accepts no liability for any damages, nor does it provide support or any guarantee for the functional efficiency of the installed software.
When installing the device within a control cabinet, you must ensure the ventilation slots are not obstructed, otherwise the device could be damaged through overheating. Protect the device from direct sunlight and dust. Please note the guidelines given under “Installation”. Operating Manual PMI 6 1003280-EN-01...
The maximum ambient temperature must not be exceeded when using the unit. Do not pour liquids over the unit or insert any objects into the unit. When in storage and during operation, protect the unit from vibration and shock. Avoid using chemicals close to the system. Operating Manual PMI 6 1003280-EN-01...
Safety 3.3.5 Maintenance Do not use thinners or organic solvents to clean the unit and touchscreen surface. Further information on care and maintenance of the touchscreen can be found in the chapter "Care and Maintenance". Operating Manual PMI 6 1003280-EN-01...
Do not use chemicals close to the system. Ensure the maximum ambient and operating temperatures are not exceeded. Ensure that neither liquids nor objects can enter the device at any time. Do not position the system close to flammable materials. Operating Manual PMI 6 1003280-EN-01...
0.2 Nm, max. 0.4 Nm. – the gasket is not damaged. – the wall thickness is at least 2.5 mm. Installation Fig.: Installing the PMI 607 Control Fig.: Installing the PMI 612 Control Operating Manual PMI 6 1003280-EN-01...
(e.g. RC networks). This is particularly important if these induct- ive loads are very close to the power supply or are fed from the same supply. If strong magnetic fields are present, we recommend you use a bulkhead separator, i.e. metal sheet (MU-metal). Operating Manual PMI 6 1003280-EN-01...
1: Functional earth 2: 0 V 3: + 24 V DC Connection example [4] [5] [4] [5] Fig.: Connection example Legende [1] Earth star point of the unit or control cabinet [2] Earth bus bar [3] Supply voltage Operating Manual PMI 6 1003280-EN-01...
All system settings can be made from the Control Panel of Windows Embedded Compact Special features and device-specific settings are described in the following! 7.2.1 Backup and restore Program which you can use to save or restore an entire directory structure. 7.2.2 Password settings Operating Manual PMI 6 1003280-EN-01...
Page 22
If you select Ask for master password ..., then the system will request that the master pass- word is entered before the Control Panel opens. Timeout If an incorrect password is entered three times or no valid password is entered within the selected time, then the Control Panel is closed. Operating Manual PMI 6 1003280-EN-01...
Page 23
Add Password Settings to the password protected area, otherwise the password you enter will be unprotected and can be changed. Level 3: Network user Access to the network servers is controlled by a central user. Operating Manual PMI 6 1003280-EN-01...
Keyboard & soft keyboard Setting the keyboard layout (German or English) and setting the soft keyboard (small, large or no keyboard) 7.2.6 Network and dial-up Modify existing connections (e.g. IP address) or set new connections (PPP over Ethernet) Operating Manual PMI 6 1003280-EN-01...
Regional settings Regional settings (number format, currency, time, date) 7.2.8 Storage Manager Format/partition memory 7.2.9 System Display/modify system properties (relationship between program memory/file management) 7.2.10 Edit PMI Start Edit or create the batch file PMI-Start.cmd Operating Manual PMI 6 1003280-EN-01...
All files and directories are copied to the system folder \Windows on start-up. Fonts (TTF) in the folder \BOOT\Windows\Fonts\ are also registered. Tip: Memory-intensive fonts should be installed on the external Storage Card using fontreg (see Windows CE Shell commands - Pilz expansions [ 35]). 7.3.2 Batch file PMIStart.cmd PMIStart.cmd is a CE Shell command batch file, which is executed sequentially after boot-...
Make sure the unit is switched off before cleaning it. This prevents you from accidentally triggering functions when you touch the touchscreen. Cleaning agents Only use water and washing-up liquid or window cleaner to dampen the cloth. Never use aggressive solvents or abrasive cleaning agents. Operating Manual PMI 6 1003280-EN-01...
Page 30
- Memory Mapped Files - Message Queue - Point-to-Point - Target Control Support (Shell.exe) UI based Notification Notification LED Support Power Management (Full) Serial Port Support UI Proxy for Kernel-Mode-Drivers Windows Embedded CE Driver Development Kit Support Library Operating Manual PMI 6 1003280-EN-01...
Page 31
Courier New Georgia Impact Lucida Sans Microsoft San Serif Segoe UI Display Tahoma Times New Roman Trebuchet MS Verdana Webdings Wingdings INFORMATION TTF formats can be post-installed (see Automatically copy to system folder (\windows) [ 26]). Operating Manual PMI 6 1003280-EN-01...
Page 32
- Internet Explorer Multi-Language Base API - URL Moniker Service - Windows Internet Services - XML MIME Viewer - Internet Option Control Panel - Scripting - JScript 5.8 - Script Authoring (Jscript) - VBScript 5.8 Operating Manual PMI 6 1003280-EN-01...
Page 33
- Software Input Panel - Software-based Input Panel (SIP) - SIP for Large Screens - SIP for Small Screens - Software-based Input Panel Drivers Windows Embedded Compact Error Reporting - Error Report Generator - Error Report Transfer Driver Operating Manual PMI 6 1003280-EN-01...
Shows the files and subdirectories contained in a directory "ECHO [mes- Shows a message or activates/deactivates the echo sage] [on| off] " "ERASE, DEL" Deletes a file or several files "EXIT" Exits "command processor shell" Operating Manual PMI 6 1003280-EN-01...
Sets the title of the "command processor" window "TYPE" Shows the content of a text file or several text files Windows CE Shell commands - Pilz expansions INFORMATION You can use the command "/?" to call up the help. There you will find more information on the individual commands.
Page 36
Syntax: ps reboot Command used to restart the device Syntax: reboot <sec> Parameter Description <sec> Waiting period in seconds before the device is re- started regedit Command used to start the registration editor Syntax: regedit Operating Manual PMI 6 1003280-EN-01...
Page 37
Command used to print a screenshot or save it to file Syntax: screenshot -p <port> -d <devicename> -x <filename> -f <form- size> -o [p]ortrait [l]andscape -q [d]raft, [h]igh -s <scalefactor> -c [c]olor,[m]ono -n <copies> Parameter Description Operating Manual PMI 6 1003280-EN-01...
Page 38
Command used to show information on the device Syntax: ver [/d] [/a] [/hw /p /o /l /s /r /c] Parameter Description Data mode, display without description, e. g.: PMI 515 10000007 264515 Show all information Outputs the hardware version Outputs the processor type Operating Manual PMI 6 1003280-EN-01...
Page 39
Command used to copy files and directory structures Syntax: xcopy [ -c | -h | -y <title>] <sourcedir> <targetdir> Parameter Description Messages are suppressed Delete target directory first <SourceDir> Absolute path of the source directory <TargetDir> Absolute path of the target directory Operating Manual PMI 6 1003280-EN-01...
Number Connection type RJ45 RJ45 Transmission rate 1 Gbit/s 1 Gbit/s Serial interface 265607 265612 Number of RS232 interfaces Environmental data 265607 265612 Ambient temperature Temperature range 0 - 50 °C 0 - 50 °C Operating Manual PMI 6 1003280-EN-01...
Page 41
Mechanical data 265607 265612 Dimensions 153 mm 222 mm Height Width 216 mm 332 mm Depth 85 mm 83 mm Weight 1.740 g 2.730 g Where standards are undated, the 2014-08 latest editions shall apply. Operating Manual PMI 6 1003280-EN-01...
Product Product type Features Order No. PMI 607 Control Operator terminal, 800 x 480 pixel resolution, ca- 265 607 pacitive touchscreen PMI 612 Control Operator terminal, 1280 x 800 pixel resolution, 265 612 capacitive touchscreen Operating Manual PMI 6 1003280-EN-01...
Page 43
Back cover Support Technical support is available from Pilz round the clock. Americas Australia Scandinavia Brazil +61 3 95446300 +45 74436332 +55 11 97569-2804 Spain Canada Europe +34 938497433 +1 888-315-PILZ (315-7459) Austria Switzerland +41 62 88979-30 Mexico +43 1 7986263-0...