Table of Contents
Advertisement
4
Function description
4.1
Key ID number of the actuator
4- Key_ID_Nummer
Key ID number of the actuator
4100
Key ID number of the actuator
4.1
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Once an actuator has been connected, the actuator's unique Key ID
number is downloaded to the higher-level process controller using a de-
fined protocol.
The Key ID number is used to clearly identify the actuator and is unique.
It is printed on the actuator's type label as a 9-digit decimal figure.
INFORMATION
Please note that the Key ID number is not printed on the actua-
tor packaging.
If the actuator is lost, it is impossible to supply a replacement
actuator with an identical Key ID number.
The Key ID number consists of two parts:
Bit 27 ... 24 is the Key Mode
Bit 23 ... 0 is the consecutive number.
Example:
4-3
Advertisement
Table of Contents
