Display - Scilogex SCI100-S Operation Instructions Manual

Rotary Evaporator
Oil mode The indicator is on when the heating
indicator bath is in the oil bath mode
Heating The indicator is on when the Heating
indicator bath is in the heating state
Turn the knob clockwise to increase the
parameter and counterclockwise to
Temperature decrease the parameter
adjustment Press this key to start / stop the
knob instrument
Press the key for 3s to switch the
heating mode
Heating bath Turn on / off the main power supply to
power switch the heating bath

4.2 Display

After the main unit is turned on, the interface is on and
indicates the real-time speed:
Table 2
Fig. 6
This interface indicates the real-time speed. Turn the
adjustment knob to set the speed and press the adjustment
knob to start the instrument. The rotation speed can be
changed by turning the adjustment knob while the
instrument is in operation. After setting, the interface
automatically changes to real-time speed.
Press the "INT" key to stop the motor, with LED indicating
"txxx" (xxx is the intermittent operation interval, to be set
within 1-999sec), as shown in the figure.
Turning the adjustment knob can adjust the forward and
reverse rotation interval time. The instrument only rotates
forward when the forward and reverse rotation interval time
is 0.
After setting, by pressing the "INT" key, the interface
changes to the real-time speed display.
9
Fig. 7