Advertisement
Quick Links
SCI-O180-S2 Digital Orbital Shaker
INSTALLATION INSTRUCTIONS
1. Unpack the instrument carefully and place the instrument on a stable, clean, non-slip and
fireproof surface.
2. Ensure good working environment free of any combustible media or flammable materials to
avoid additional hazards.
3. Place the shaker at >10cm distance from the wall and other units if using multiple units
together.
4. Ensure that there is no accidental spillage during speed setting.
5. Do not use any combustible media or flammable materials to avoid any additional hazards.
6. Ensure that the label indicated the correct voltage before connecting the unit to power
supply.
7. Do not operate the unit with a damaged power cord.
8. Disable the power supply while fitting the accessories.
9. Ensure that the unit and its accessories are in good working condition before each operation.
Operating Procedure
Multifunctional Digital Orbital Shaker
1. Switch power ON and the instrument starts to self-check.
2. Press the "Mode Key" and the unit enters into adjustment mode.
3. Press the "+ / - Keys " and confirm the set speed and time.Adjust the speed and time to
Ver.20230728
Advertisement
Related Manuals for Scilogex SCI-O180-S2
Summary of Contents for Scilogex SCI-O180-S2
- Page 1 SCI-O180-S2 Digital Orbital Shaker Ver.20230728 INSTALLATION INSTRUCTIONS 1. Unpack the instrument carefully and place the instrument on a stable, clean, non-slip and fireproof surface. 2. Ensure good working environment free of any combustible media or flammable materials to avoid additional hazards.
- Page 2 Replace the driver board. Motor damage Replace the motor. Driver board damage Replace the driver board. Inaccurate shaking Photoelectric switch Replace the photoelectric switch. speed damage Driver board damage Replace the driver board Shaking speed Motor damage Replace the motor. jammed SCILOGEX.COM...
Need help?
Do you have a question about the SCI-O180-S2 and is the answer not in the manual?
Questions and answers