Page 1
Operation Instructions LED Digital Rotary Evaporator Please carefully read the Instructions, and use the product safely under the direction of the Instructions. If any information of shapes and performance indicators changes, we will not notify this otherwise. Ver.20181126...
Page 2
information or stop of business (if any) caused by the Disclaimer information of the manual or the product it mentions. • • The intellectual property right on the manual belongs The company reserves the right to change specification to Dragon Laboratory Instruments Limited (hereinafter and price of the product.
Contents Introduction ................. 1 How to acquire help ............1 Warranty ................1 Safety notes ..............2 Scope of application ............ 5 Inspection ..............6 3.1 Open-package inspection ........6 3.2 Package list ............6 Control and display ............. 6 4.1 Control ..............
Rotary Evaporator Introduction Warranty According to the manufacturer’s warranty clause, the Welcome to use the Operating Instructions of Rotary Evaporator. Users are advised to read carefully this manual warranty period of the product is 24 months (since the before using this instrument, operate the instrument purchase date) provided that it is used by the normal according to the instructions contained herein and be aware operation method under the normal service conditions...
Rotary Evaporator • Place the instrument on a stable, clean, antiskid, dry Safety notes and fireproof table surface. • Please carefully read the Manual before operating the • Make sure there is sufficient space above the product, and observe the specifications on safe instrument and the glass assembly might exceed the operation.
Page 6
Rotary Evaporator safety of the heating bath. kettle. • • The heating bath’s safety temperature shall at least Please refer to the operating instructions for optional 25 ° C lower than the ignition point of the medium accessories. • being handled. Please use this instrument in a closed fume hood or •...
Page 7
Rotary Evaporator must be opened before heating and once again after after stop of the operation! Before further operation, cooling. When performing vacuum distillation, the please let each part cool down. • steam must be condensed before release or released Note: be careful to avoid boiling delay! When the safely.
Rotary Evaporator immediately turn off the instrument or reduce the 2. Scope of application rotation speed. This instrument designed such application • In case of powering on after power failure, the environments as schools, labs and factories, in conjunction instrument will not automatically be started up. with the optional accessories recommended by the •...
Rotary Evaporator 3. Inspection 4. Control and display 3.1 Open-package inspection 4.1 Control If you find any damage on the package, please specify the damage on the receipt. If you find any internal damage after Rotary head control panel Condenser opening package, please...
Page 10
Rotary Evaporator Main unit three-in-one switch Heating bath power interface Fig. 2 Heating bath power switch Fig. 3...
Page 11
Rotary Evaporator Name Description Indicates the current working status and Adjustment LED display parameter setting. knob display Forward The indicator is on when the instrument indicator is in the state of forward rotation only The indicator is on when the instrument Reverse is rotating forwardly and reversely in Forward and reverse...
Rotary Evaporator This interface indicates the real-time speed. Turn the Oil mode The indicator is on when the heating adjustment knob to set the speed and press the adjustment indicator bath is in the oil bath mode knob to start the instrument. The rotation speed can be Heating The indicator is on when the Heating changed by turning the adjustment knob while the...
Page 13
Rotary Evaporator When the heating bath is turned on, water mode is the default mode, the water mode indicator is on and the interface is on, indicating the real-time temperature: Fig. 9 Oil bath mode display: Fig. 8 Turn the temperature adjustment knob to set the target temperature of the heating bath.
Rotary Evaporator 5. Installation and testing 5.1 Installation Fig. 12 • Tighten the screw (b) by hand, adjust the angle of the Fig. 11 motor head and tighten the rotating head locking nut (c) • Place the main unit on a flat tabletop and squeeze the to prevent accidental rotation.
Page 15
Rotary Evaporator Fig. 14 Fig. 13 • Rotate the locking device (d) (Fig. 12) by 60° counterclockwise to mount the evaporating tube in place, and rotate the locking device (d) clockwise for locking • Mount the seal ring (Fig. 13 and Fig. 14) Fig.
Page 16
Rotary Evaporator Fig. 16 Fig. 18 • Piping connection (Fig. 18) Vacuum tube interface Condensate outlet Condensate inlet Fig. 17 • Mount the fixing device for the vertical condensation glass assembly (Fig. 17)
Rotary Evaporator flask into the heating bath Fig. • Note: Press the adjustment knob to start rotation Normal work of the product during the operations above To ensure good sealing performance, each glass means the product can be put into normal service. If ground joint may be coated with a layer of sealing abnormal work occurs, which means the product may be grease.
Rotary Evaporator • remove the foreign object if any. Power must be disconnected before maintenance and • cleaning, and please use our recommended methods to ERR 002, indicating abnormal speed. clean the product. The method to clean: Turn off the instrument and restart it. •...
Rotary Evaporator EN 61326-1 Conforming to the following EU standards: Cautions: • EMC standard: 89/336/EWG The electronic device cannot be cleaned with Mechanical design standard: 73/023/EWG detergent. • The instrument to be repaired must be 9. Technical parameters cleaned while contamination hazardous substances must be avoided, and Item...
Page 20
Rotary Evaporator External dimension [W x D x 300× 300× 240 440× 320× 450 H, mm] Weight [kg] Allowable ambient 5-40 temperature [° C] Allowable RH DIN EN60529 protection IP20 class...
Page 21
SCILOGEX, LLC 1275 Cromwell Ave. Suite C6 Rocky Hill, CT 06067 USA Tel: +1(860) 436-9221 Fax: +1(860) 436-9745 info@scilogex.com www.scilogex.com...
Need help?
Do you have a question about the SCI100-S and is the answer not in the manual?
Questions and answers