Display; Trial Run - Scilogex SCI340-ProT User Manual

4.2 Display

Characters Descriptions
Temp & °C Displays temperature when the heating
function is switched ON.
Stir Displays stirring speed when the stirring
function is switched ON.
Hot Displays HOT warning if the plate
temperature
switching OFF the heating function.
Timer Timer
Figure 5
is above 50°C
parameter when the
Probe
Remote
Rated value/Real
value
Note：
If both heating and stirring functions have been
started at the same time, heat display always has
higher priority. If in this case speed is changed via
the stirring knob, it display s stirring speed and
reverts to temperature after 5 seconds.

5 Trial Run

•
Make sure the required operated voltage and power
supply voltage match.
•
Ensure the socket is properly grounded.
•
Plug in the power cable, ensure the power is on and
after
begin initializing.
•
Add the medium into the vessel with an appropriate
timer
6
function is switched ON.
Display when using external probe.
Display when using remote control.
Display values in when heating or
stirring or timer function is switched
ON.
Table 3