Computer Instructions - York Fitness Performance Speed Bike Owner's Manual

KEY GUIDE
Overview:
The unit is an electronic display that shows all the functions of your bike. The workout parameters include:
Scan, Time, Speed, Distance and Calories. All workout parameters may be selected by the select key.
Mode or Function
Power on
Select function Scan
Time
Speed
Distance
Calories
Reset
Auto off
SPECIFICATIONS:
FUNCTION
Battery type
CONSOLE INSTRUCTION
By pushing the button, the unit will be on and display the parameters of
Push the button, and the unit will display 5 parameters one by one. Push
the mode key until the "SCAN" signal shows on lower right side. The unit
will scan through Time, Speed, Distance, and Calories, each for 4
Push the mode key until the "TMR" points to "Time" and display the
exercises time. If the bike stop moving, the unit will stop count time also.
When the "SPD" points to "SPD" to display the speed.
When the "DIST" points to "Dist" it displays the distance.
When the "CAL" points to "CAL" it displays the calories burned.
Push the mode key for 3 seconds and the display will reset to zero.
The unit will be off if the speed signal stops for more than 4 minutes.
Auto Scan
Elapsed Time
Speed
Distance
Calorie
Operating temperature
Storage temperature
14
www.yorkfitness.com.au
Action
the last exercise.
seconds.
unit: km/h.
unit: km.
unit: K Cal.
Every 4 seconds
00:00~99:59
0.0~999.9km/h
0.0~999.9km
1 pcs of Size-AA or UM-3
0~9999kcal
0°~+40C
-10°~＋60C