Advertisement
MANUAL CONTROLS
The manual controls are located on the top right of the fireplace insert behind an
access panel.
You have the following controls:
Turn on / off the device
Press the touch power button. Touch the touch button -turn on the unit, the heater starts, showing
1. POWER ON/OFF BUTTON
Power to the unit
2. FLAME COLOR AND BRIGHTNESS ADJUSTMENT
Press this button to change the flame color, it has3 different color to adjustable from F1-F2
-F3.
Press the button on 3 seconds to change the flame brightness, it has 5 classes flame brightness
to adjustable from L5-L4-L3-L2-L1.
3. HEATER SETTINGS
This fireplace insert consists of a fan forced electric heater with two heater settings,800W(L)
or 1,500W(H) . Press the button once to turn on the Low heater ,press the button a second time
to turn on the High heater, press the button the third time to turn off the heater.
Note: the fan may continue to run for a short time after the heater is turned off.
The fan will turn off automatically
4.
Adjust the timer.
Period timer from 0.5 to 7.5 hours. The
heater will operate for 0.5 hour to touch, and so forth. The
heater will stop heating when the time is exhibited.
Advertisement
