Table of Contents
Advertisement
IDENTIFICATION
4 Product Description
Product Description
The SCANNDYgun series devices from FEIG ELECTRONIC capture and store barcode and RFID data for a
variety of uses and transmit barcode and RFID data to a host via USB connection, Bluetooth or WiFi. This
document provides basic instructions for using the SCANNDYgun series device.
Label
Description
1
Left LED (green)
Left LED (red)
2
Right LED (yellow)
Right LED (blue)
3
Rubber Protector
ID SCANNDYgun
Fig. 1: ID SCANNDYgun display top view
Green LED: Lights up green when the SCANNDYgun is turned ON.
When the battery level is empty, it flashes every 2 sec.
(Further function can be user defined with the programming interface.)
Red LED: Lights up red if connected to a battery charger (USB or power
adapter).
Yellow LED: Lights up yellow if a barcode or RFID tag was read
successfully. Is flashing yellow (500ms) when connected to USB (USB
memory stick mode).
Blue LED: Lights up blue if Bluetooth connection is established.
Is flashing blue every second while connecting to a Wi-Fi network.
Is flashing blue every 5 seconds when connected to a Wi-Fi network.
(Further function can be user defined with the programming interface.)
Protective rubber cover to protect the device from splash water, dust and
drops. It is recommended not to use the device without the rubber protector.
4 Product Description
Function
Page 8 of 39
Advertisement
Table of Contents
