Feig Electronic ID SCANNDYgun User Manual page 10

Rfid-/barcode scanner with gun grip and big trigger button
Table of Contents

Advertisement

IDENTIFICATION
13
ON/OFF / OK Key
12+13
Launcher Mode
ID SCANNDYgun
Default: ON/OFF key
When OFF: Shortly press the key to boot the device.
When ON: Press the key for 3 seconds to shut the device down.
When ON: Shortly press the key to confirm messages or inputs.
(Further function can be user defined with the programming interface.)
Fall back Configuration mode
Follow the instructions below to set the device into the Launcher Mode.
1.
Switch off the device.
2.
Press and hold key 10 (DOWN) and key 13 (OK) until you hear a beep
(this may take several seconds).
3.
Connect the device to a PC via USB.
4.
The device will be mounted as a removable drive "SCANNDY".
5.
You can now modify and save the settings.
6.
Press key 11 (Trigger) until you hear a beep.
The device will now restart with the new settings.
4 Product Description
Page 10 of 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pan mobile id scanndybasic

Table of Contents