Feig Electronic ID SCANNDYgun User Manual page 24

IDENTIFICATION ID SCANNDYgun 6 Operation
confirm when it is prompted by the distant device. Enter the access key by using the alphanumeric keypad
(14). For alphabetical characters press and hold the alpha/numeric toggle key (15) for 1 second to toggle
between alphabetical and numeric input mode.
 NOTE:
The factory default Slave Access Key is 1234.
Press the OK key (13) to save the entered access key and return to the Bluetooth main menu.
Select the menu item "Set Security Status" from the Bluetooth menu to set the Bluetooth security ON or OFF.
 NOTE:
In factory default the security status is set to OFF.
Press the left navigation key (10) to change the settings and press the OK key (13) to save the entered
status and return to the Bluetooth main menu.
Select the menu item "Reset BT" from the Bluetooth menu to reset Bluetooth to factory default.
 NOTE:
All Bluetooth settings will be reset to factory default.
Press the OK key (13) to reset the Bluetooth settings or any other key to return to the Bluetooth main menu.
Page 24 of 39