Table of Contents
Advertisement
IDENTIFICATION
6.4.3 RFID
To scan an RFID tag follow the steps below:
1. Aim the scanner at the RFID tag.
2.
Make sure the tag is within the read range.
3.
Press the trigger key (11) to read data of the RFID tag.
4.
The device beeps and the right LED lights up green to indicate a successful decode.
(Refer to the SFL script or API reference guide for information on how to define beeps and vibration
alerts.)
ID SCANNDYgun
6 Operation
Page 29 of 39
Advertisement
Table of Contents
