Menu Item „Hf; Menu Item „Uhf - Feig Electronic ID SCANNDYgun User Manual

Rfid-/barcode scanner with gun grip and big trigger button
Table of Contents

Advertisement

IDENTIFICATION
ID SCANNDYgun
6 Operation
6.3.5 Menu Item „HF"
Highlight the menu item "HF" and press the left navigation key (10) to enter the configuration for the HF RFID
reader/writer.
6.3.6 Menu Item „UHF"
Highlight the menu item "UHF" and press the left navigation key (10) to enter the configuration for the UHF
RFID reader/writer.
Region
Highlight the menu item "Region" to set the frequency for the region the device is used in. Press the left
navigation key (10) to save the settings and return to the UHF menu or press the right navigation key (8) to
cancel.
 NOTE:
Changing the frequency (region) may have influence on the UHF reading/writing performance
because of the mismatch with the reader antenna.
Power Save Mode
Highlight the menu item "Power save mode" and press the left navigation key (10) to change the settings.
Select the power save mode value and press the left navigation key (10) to save the settings and return to
the UHF menu. Press the right navigation key (8) to cancel.
R/W Power
Highlight the menu item "R/W Power (cdbm)" and press the left navigation key (10) to change the read/write
power of the UHF reader/writer module. The power can be set from 1 dBm to 23 dBm.
Input the values as follows:
Value in dBi * 100
Example: 18 dBi * 100 input = 1800
Press the OK key (13) to save the settings and return to the UHF menu.
Fast Comm.
Highlight the menu item "Fast comm." and press the left navigation key (10) to select or deselect the fast
communication option.
Gen2 Session
Highlight the menu item "Gen2 session" and press the left navigation key (10) to setup the session options.
By setting the session ID, you can optimize the communication between reader and tag. This setting can be
very helpful if several different tags and tag populations are in the reading field. Press the right navigation
key (8) to save the settings and return to the main menu.
For further information on Gen2 sessioning, please refer to the EPC GEN2 Tag protocol.
Page 21 of 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pan mobile id scanndybasic

Table of Contents