Adjusting The Video Screen/Menu Position - JVC D-ILA DLA-M2000LU Instructions Manual

Adjusting the Video Screen/Menu Position

The position of the video screen and the menu on the video screen can be adjusted. You can finely adjust the video screen
position. The menu will move widely on the video screen.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Setting" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Setting 1" or "Setting" submenu appears on the screen.
Video submenu ("Setting 1" submenu)
Setting 1
Position
Tone
Aspect change
Decoder
Setting 2
Decoder is only displayed when there is a
signal for the Video IN terminal.
3 Select "Position" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press the ENTER button.
The "Position" submenu appears on the screen.
Horizontal position
4
Press the ENTER button to select "Disp.Posi." or "Menu".
Disp.Posi. (Display Position):The video screen position (display position) can be adjusted.
Menu:The menu position can be adjusted.
5 Press the cursor button 5 5 5 5 , ∞ ∞ ∞ ∞ , 2 2 2 2 , or 3 3 3 3 to move the video screen (display) or the
menu.
*Repeat 4 and 5 to move both video screen (display) and menu positions.
Adjustment item
Disp.Posi. - H
Disp.Posi. - V
Menu - H
Menu - V
* : Factory set value
6
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
ENTER
TV Cinema
4:3 16:9
ENTER
ENTER
Position
Disp.Posi.
12,12
Button
2 or 3 The video screen moves to the left or right. (–30 ↔ +30)
5 or ∞ The video screen moves up or down. (–30 ↔ +30)
2 or 3
The menu moves to the left or right. (Left, center*, right)
5 or ∞
The menu moves up or down. (Top, center*, bottom)
PC submenu ("Setting" submenu)
Setting
Tracking
Phase
Position
Resize
Clamp
Menu
ENTER
Vertical position
Adjustment content
Menu Operations
123
12
ENTER
1:1 Panel Aspect
ST FP BP
49