Adjusting Tracking / Phase - JVC D-ILA DLA-M2000LU Instructions Manual

Menu Operations

Adjusting Tracking / Phase

Normally, tracking and phase adjustments are automatically carried out when a video signal is input to the projector for the
first time, or when the QUICK ALIGN. button on the remote control is pressed.
However, you can manually adjust the tracking and phase on the menu.
Both tracking and phase can be adjusted in PC menu mode. In Video menu mode, only tracking is adjustable, though this
adjustment is not normally required.
If a wide stripe appears on the screen, adjust the lateral size of the picture image and the display area (tracking adjustment)
so the stripe disappears.
Also, if text projected on the screen appears flickers or appears dim, adjust phase adjustment so it becomes clear.
1
Press the MENU button.
The main menu appears on the screen.
2 Select "Setting" with the cursor button 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Setting 1" (video mode) or "Setting" submenu appears on the screen.
In video mode:Select setting 2 with the cursor ∞ or 5, and press ENTER button.
The "Setting 2" submenu appears on the screen.
Video submenu
Setting 1
Position ENTER
Tone TV Cinema
Aspect change 4:3 16:9
Decoder ENTER
Setting 2 ENTER
Decoder is only displayed when there is a signal for the AV
IN terminal.
3 Select "Tracking" or "Phase" with the cursor button 5 or ∞ ∞ ∞ ∞ .
*"Phase" is shown only in PC submenu.
4
Adjust the tracking or phase with the cursor 2 2 2 2 or 3 3 3 3 .
Adjust the tracking and phase of the picture image being projected. To adjust the phase, first check for correct tracking
adjustment.
*To adjust multiple items, repeat 3 and 4.
Adjustment item
Tracking
Phase
5
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
Note
• A dim image could be caused by insufficient adjustment of brightness and contrast. Before adjusting phase, make sure that
brightness and contrast are correctly adjusted. To adjust them, refer to "Adjusting Picture Quality" on page 47.
46
Setting 2
Tracking 123
Screen 4:3 16:9
HDTV
1030i 1035i
Setting 1
ENTER
Button
The picture image shrinks laterally (right-to-left) or extends laterally (left-to-
2 or 3
right). (–128 ↔ +127)
2 or 3 Set to a position where text appears clear. (PC menu mode only) (0 ↔ 31)
PC submenu
Setting
Tracking
Phase
Position
Resize
Clamp
Adjustment content
123
12
ENTER
1:1 Panel Aspect
ST FP BP