Effective Range And Distance Of The Remote Control Unit - JVC D-ILA DLA-M2000LU Instructions Manual

Installing the Projector

Effective Range and Distance of the Remote Control Unit

The remote control unit can be used as either a wireless remote control unit or a wired one.
I
Using as a wireless remote control unit
Aim the remote control unit toward the remote sensor on the front or the rear of the projector.
The operable distance of the remote control unit is about 10 m for direct reception. The remote control unit can be used by
having it reflected on the screen. In this case, the total distance of "A+B" should be about 10 m or less. The operable angles
of the remote control unit are 15° right and left, and 15° up and down.
I
Using as a wired remote control unit
Connect the supplied remote cable between the wired terminal of the remote control unit and the REMOTE terminal on the
rear of the projector.
Connect the plug which has the remote cable core to the projector (unit) remote terminal.
Using it as a wired remote control, you do not have to worry about the operative angle of the unit, though the operative
distance is limited by the length of the remote cable (approx. 9.84 ft (approx. 3 m)).
Note
• When the remote control unit is used as a wired unit, its signal transmitter and the projector's remote sensor do not work.
CAUTION
• Do not extend the remote cable. Doing so could cause a malfunction of the projector.
20
15˚
Projector
FREEZE
OPERATE
HIDE
PRESET MENU
ESCAPE VIC SELECT
PC
+
DIGITAL
ZOOM KEYSTONE VIDEO
–
RM-M2000 REMOTE CONTROL UNIT
15˚
15˚
A
15˚
B
Remote control unit
Remote cable (supplied)
Screen
REMOTE
RS-232C