Adjust Focus; Adjusting Sound Volume - JVC D-ILA DLA-M2000LU Instructions Manual

I Projector's buttons
LAMP
HIDE
VOLUME+/-
KEYSTONE
button
PRESET
PRESET
button
ESCAPE
button
ESCAPE
I Remote control unit
FREEZE
OPERATE
HIDE
PRESET MENU
PRESET
button
ESCAPE
ESCAPE VIC SELECT
button
PC
+
DIGITAL
ZOOM KEYSTONE VIDEO
–
+
U T
SHIFT ZOOM FOCUS
–
D W
+ +
QUICK
SHUTTER ALIGN. VOLUME
– –
RM-M2000 REMOTE CONTROL UNIT
STAND BY
TEMP
OPERATE
PC
VOLUME
VIDEO
MENU
ENTER
VOLUME+/-
button
Note
• The function of GL-M2915SG is to adjust the view angle
zooming by 2%. (For fine view angle adjustment)
To enlarge the projected screen size
Press the ZOOM W (Wide) button.
To reduce the screen size
Press the ZOOM T (Tele) button.
Remote control unit
T
ZOOM
W

4. Adjust Focus

Adjust focus with the following buttons on the remote control
unit.
To focus on farther points
Press the FOCUS + button.
To focus on nearer points
Press the FOCUS – button.
Remote control unit
+
FOCUS
–

5. Adjusting Sound Volume

Adjust sound volume with the VOLUME +/– buttons. When
the VOLUME + or – button is pressed, "Audio-Vol" appears
on the screen together with the level bar and set value (0 to
50). When "15 sec." is displayed in the menu, "Audio-Vol" will
appear in approximately 15 seconds.
Audio - Vol 12
When you press the VOLUME + button:
The sound volume becomes higher. (0 → 50)
When you press the VOLUME – button:
The sound volume becomes lower. (50 → 0)
* When the volume is set to 0, no sound will be heard from
the built-in speaker.
Remote control unit
+
VOLUME
–
Notes
• When "Audio-Vol" is displayed on the screen, pressing the
PRESET button resets the set value to "0".
• Press the ESCAPE button to immediately remove the
volume display.
Basic Operations
Projector
+
VOLUME
–
33